DJI-Inspire 3

Description

DJI Inspire 3｜Pro Ecosystem Language: English DJI Inspire 3 Introduction DJI Inspire 3 is a professional camera drone featuring a sleek new design optimized for aerodynamics to reduce air resistance. Its maximum dive speed has increased from 9 m/s on Inspire 2 to 10 m/s, while vertical ascent and descent speeds have been increased from 6 m/s and 4 m/s to 8 m/s respectively. Its powerful maneuverability enables agile and precise control, with a maximum flight time of up to 28 minutes. The powerful FPV camera, visual sensors, positioning antennas, and memory card slots are seamlessly integrated into the airframe, delivering a minimalist appearance and modern industrial aesthetics. Next-generation spatial intelligence with an adaptive, high-mobility precision flight system. Centimeter-Level RTK Positioning Inspire 3 integrates high-precision RTK positioning technology widely used in industries such as construction and surveying, achieving centimeter-level accuracy. Compared to traditional meter-level GNSS positioning, RTK not only improves flight stability but also significantly enhances flight path accuracy, greatly boosting production efficiency. The RTK antenna features a new stacked ceramic design integrated inside the aircraft body. It supports three GNSS systems (GPS, BeiDou, and Galileo) and provides centimeter-level dual-frequency positioning. Users can activate an RTK network or use the D-RTK 2 Mobile Station to achieve high-precision positioning without installing any additional modules. Dual-Antenna Directional System Inspire 3 is equipped with stacked ceramic antennas at both the front and rear of the aircraft, offering strong resistance to magnetic interference and further enhancing flight precision and safety. Waypoint Pro System Waypoint Pro is designed specifically for aerial cinematography, offering extensive customization options for flight paths and camera movements. With new Repeatable Routes and 3D Dolly modes, users can easily achieve innovative automated shooting experiences. RTK centimeter-level positioning ensures highly accurate route planning and execution. Whether filming solo or working with a professional crew, Waypoint Pro empowers creators to confidently handle even the most complex scenarios. Repeatable Routes Using the repeatable route feature, the aircraft automatically follows the same flight path while maintaining all preset parameters, including altitude, speed, gimbal angle, and camera settings. This allows filmmakers to easily complete complex single-take shots or fly the same route at different times, making long-term time-lapse photography effortless—perfect for capturing transitions such as day-to-night or seasonal changes. 3D Dolly Mode 3D Dolly simulates cranes, cable cams, or track-mounted systems used in film production, while far exceeding their limitations. Once a flight path is planned, operators can manually control the aircraft back and forth along the route, adjusting speed and gimbal angles as needed. This makes complex cinematic camera movements more efficient and visually compelling. Custom 8K Sensor The X9-8K Air, DJI’s lightest full-frame three-axis gimbal camera to date, is custom-designed for Inspire 3 to elevate aerial cinematography to new heights. Powered by DJI’s latest CineCore 3.0 image processing system, it supports internal recording of up to 8K/25fps CinemaDNG and 8K/75fps Apple ProRes RAW, meeting the demands of high-end film and television production. High-Definition Recording Performance • Internal ProRes RAW recording up to 8K/75fps• Internal CinemaDNG recording up to 8K/25fps The ultra-high 8K resolution preserves textures close to what the human eye sees, delivering stunning clarity on large screens. RAW formats fully unlock the sensor’s potential, providing extensive flexibility for visual effects and color grading. In S&Q mode, X9-8K Air supports internal full-frame 4K/120fps ProRes RAW recording without cropping, offering even more creative possibilities. Dual Native ISO X9-8K Air features dual native ISO. At frame rates of 30fps and below, it supports EI 800/4000, ideal for 24fps cinema and 25fps broadcast workflows. At frame rates above 30fps, EI 320/1600 is available. This allows the camera to capture rich detail with extremely low noise even in low-light environments such as cityscapes or beaches, rivaling professional ground-based cinema cameras. Over 14 Stops of Dynamic Range With more than 14 stops of dynamic range, X9-8K Air captures rich highlight and shadow detail even in complex lighting conditions like sunrise and sunset. This provides greater flexibility in post-production, preserving natural color even after significant exposure adjustments. DL Mount Lenses X9-8K Air uses DJI’s proprietary DL mount, compatible with full-frame DL lenses: 18mm, 24mm, 35mm, 50mm, and 75mm. These lenses cover ultra-wide to medium-telephoto focal lengths and are specifically designed for aerial use. Each lens features a lightweight integrated carbon-fiber body, with the lightest weighing only 178 g, ensuring exceptional handling performance. DJI Cinema Color Science (DCCS) DJI Cinema Color Science ensures accurate reproduction of natural landscapes, urban environments, and skin tones across varying lighting conditions. It seamlessly matches the color profile of Ronin 4D and supports the standard ACES workflow, ensuring consistent color from air to ground for demanding film and television production pipelines. Multi-Camera Timecode Synchronization Via the onboard 3.5 mm port, Inspire 3 supports timecode synchronization between aerial and ground-based equipment. This significantly improves editing efficiency when handling footage from multiple cameras. Cinema-Grade O3 Pro Video Transmission Inspire 3 features DJI’s O3 Pro cinema-grade video transmission system.• Up to 15 km range in single-controller mode• Up to 12 km in dual-controller mode Both the gimbal camera and FPV camera support 1080p/60fps live feeds with latency as low as 90 ms. O3 Pro also supports 4K/30fps live transmission at distances up to 5 km, enabling ultra-high-definition monitoring and live broadcasting on set. Dual-Control Independent Link Inspire 3 significantly enhances the dual-operator experience. Both controllers receive live video and can independently control the aircraft, allowing pilots and gimbal operators to work from different locations on set. If the pilot loses signal, the gimbal operator can take over flight control to safely return or land the aircraft. Dual Battery System Inspire 3 features the new TB51 dual battery system, utilizing advanced battery chemistry to optimize reliability and performance. Compared to TB50 batteries, TB51 batteries are smaller, lighter, more aerodynamic, and operate at a higher voltage. The system delivers up to 28 minutes of flight time and supports hot swapping for continuous operation. If battery temperature falls below 10°C (50°F), automatic heating activates, ensuring reliable performance even in environments as cold as -20°C (-4°F).